mini PhotoScanner
User Manual mini PhotoScanner
Maintenance
Cleaning the roller
1. With an SD card or USB memory stick inserted, press and hold the
power button for 0.5 seconds to turn on the scanner
2. Place the supplied roller
cleaning tool into the feed slot
3. The cleaning tool will be feed
through the slot and the cleaning
process will begin
Cleaning the image sensor
1. With the scanner turned off, insert
the sensor cleaning tool into one end
of the output slot
2. Gently slide across back and
forth around 5 or 6 times
3. Remove the sensor cleaning tool
and store it in a safe place to
protect from dust
pg9
To Next Page
Loading...
Need help?
General
