Kaiser Baas REVO E1 - How to Assemble; Handlebar Installation; How to Fold; Folding Mechanism Procedure

Before using your E1 E-Scooter you
will need to attach the handles. Before
installingthem,pleasemakesureyou
dierentiatetheleftandrighthandles
carefully.Pleaseseethedierenceofleft
and right handles from the below images.
Onceidentied,screwthehandlesontothe
E-Scooter and tighten.
HOW TO ASSEMBLE YOUR E1 E-SCOOTER
15 - ENG
L
R
HOW TO FOLD YOUR E1 E-SCOOTER
16 - ENG
Folding the Scooter
1. Twist the Buckle Lock on the folding
mechanism as per the image.
2. Push the Folding Wrench forward until it is
pushed down.
3. Guide the Steering Column down until
theLockingClipisxedintotheLocking
Latch on the rear fender.
1
2
3