Kaiser Baas REVO E1 - Charging Indicator and Notes; Inspection and Maintenance

CHARGING YOUR SCOOTER INSPECTION AND MAINTENANCE
09 - ENG 10 - ENG
• Use only the E-Scooter charger that you
received in your box.
• IftheE-Scooterispoweredonwhen
youentertheplug,theBatteryIndicator
willbeginblinking,iftheE-Scooteris
poweredowhenyouentertheplug,
theBatteryIndicatorwillnotblink.
Onlytheindicatorlightonthechargerwill
tell you the status of the battery during
charging.
Your E-Scooter requires routine inspection
and maintenance. This chapter describes
maintenance steps and important
operating tips. Before you perform the
followingoperations,ensurethepowerand
charging cable is disconnected.
Inspecting and Cleaning your E-Scooter
Disconnectthechargerandturnoyour
E-Scooter.
Routinely check the body of the E-Scooter
and tires for damage or excessive wear.
Avoid using water or other liquids and
cleaners on the E-Scooter for cleaning. Wet
acleanclothwithcleansoapywater,rinse
thecloththoroughly,andwipethebodyof
the E-Scooter making sure that water does
notgetintothepowerbutton,charging
port,thefootmats,ortires.
Storing your E-Scooter
Fully charge your battery before storing.
IfyouarestoringyourE-Scooterforan
extendedperiodoftime,pleasefully
charge your E-Scooter at least once every
three months.
Iftheambienttemperatureofthestorage
locationisbelow0°,pleasedonotcharge.
You must bring the E-Scooter into a
warmer environment before charging.
CheckunderBatteryInformationand
Specicationsformoredetails.
To prevent dust from getting into your
E-Scooter,trywrappingitorsealingitwith
its original packaging.
StoreyourE-Scooterindoors,inadryand
suitable temperature.
Users who disassemble the E-Scooter will
forfeit their right of warranty.