Kaiser Baas REVO E1 - Battery Handling and Disposal; Charging Your Scooter; Charging Procedure; Charging Best Practices and Warnings

BATTERY INFORMATION CHARGING YOUR SCOOTER
07 - ENG 08 - ENG
• Donotattempttomodify,change,or
replace your battery.
• Do not use your E-Scooter if the battery
beginstoemitodor,overheats,or
begins to leak.
• Donottouchanyleakingmaterials,or
inhale fumes emitted.
• Do not allow children and animals to
touch the battery.
• The battery contains dangerous
substances,donotopenthebattery,or
insert anything into the battery.
• Please only use the charger provided
with the E-Scooter.
• Do not attempt to charge the E-Scooter
if the battery has discharged or emitted
anysubstances.Inthatcase,thebattery
should be abandoned for safety.
Step 1: Ensure that the charging port is
clean and dry.
Step 2: Plug the charger into the power
socket,thenconnectthecablewiththe
powersupply(100V240V;50,60Hz),make
sure the light on the charger lights up.
Step 3: Put the DC connector plug into
the charging port of the E-Scooter. The
indicator light on the charger should
changetoRED,indicatingthatyour
E-Scooter is now being charged. When
the RED indicator light on your charger
turns to GREEN then your E-Scooter is
fully charged. A full charge typically occurs
within 3 hours.
Step 4: Please unplug the charger from
your E-Scooter and from the power outlet
whenyouarenishedcharging.
• Pleasefollowalllocal,stateandfederal
lawsinregardstorecycling,handling
anddisposingofLithiumIonbatteries.
• The E-Scooter should only be shipped
in its original packaging.
• Do not throw away your box as you
will need your E-Scooter packaging for
future use.
Important notes about Charging
Ifthegreenlightonyourchargerdoes
not turn RED when you plug it into your
E-Scooter,itcouldmeanyouhaveto
check the cables to ensure you have a
proper connection; or that your E-Scooter
is already fully chaged. Push and hold
your power button next to the charging
port to check the status of your battery in
the display.
• Donotovercharge,asthiswillaectthe
life of the battery.
• The best charging temperatures are
between 0°~40°. Extreme cold and
extreme heat will prevent your battery
from charging fully.
• Make sure to unplug your charger before
standingonoroperatingyouE-Scooter,
as this can be very dangerous.