Quality
This setting lets you select the quality of the images. S.Fine is the highest and
largest quality. This setting may be useful if you are trying to reduce the file size of
the images.
Auto Shooting Mode
Auto photo mode allows you to shoot a continuous sequence of photos. This mode
is activated by clicking the Record/Confirm button and will shoot automatically until
stopped by pressing the Record/Confirm button again.
Shoot in this mode with the following intervals 3/5/10/30/60 seconds.
Sharpness
This setting controls how much detail and how sharp images appear. Intervals of
Strong/Normal/Soft.
White Balance
Manually control the white balance. Camera is set to Auto by default.
Interval range: Auto/Daylight/Cloudy/Tungsten/Fluorescent
HDR
HDR or High Dynamic Range setting allows your camera to capture more
contrasting and vivid images. This setting applies to both Video and Photo Capture
Modes.
Color
Choose whether to capture images in Color/Black & White/Sepia.
ISO
Manually control the ISO the camera captures footage. The default option is Auto.
Note that the higher the ISO number the more noise/grain will appear in your
footage.
Interval options 100/200/400/800/1600.
Anti-Shaking Stabilisation
This mode enables the image stabilisation. This mode is useful in reducing the
blur/shakiness in some situations.
Note that it will slightly reduce the field of view when this mode is enabled.
Quick Review
When enabled this, setting displays the photo immediately after clicking the capture
button for 2/5 seconds.
To Next Page
Loading...
