Kaiser Baas X3 - Photo Capture and Settings; Photo Mode Overview; Photo Resolution Options

X3 User Guide
14
Photo Mode
To enter Photo Mode, click the Power/Toggle button once on the front of the
camera.
Click the Record/Confirm button to take a photo.
When capturing a photo, the red photo LED on the front of the camera and the blue
power LED on the back of the camera will flash once.
There are 3 modes to capture photos.
Photo Settings
Photo Resolution.
MP
Resolution
Aspect Ratio
12
4032x3024
4:3
10
3648x2736
4:3
8
3264x2448
4:3
5
2592x1944
4:3
3
2048x1536
4:3
2
1600x1200
4:3
Cap Timer Mode
When this mode is enabled, it lets you set intervals for when a single photo is taken
after clicking the Record/Confirm button.
3/5/10/30/60 second intervals are available.
Photo Burst Mode
Photo burst lets you capture photos in a rapid fast firing sequence.
You can set the following intervals 3/5/10 P/S (photos/second)
Note: Shooting in higher intervals requires some time to save the images to the
memory card. The blue power LED will flash while saving.