Battery Guide
Only use KB official batteries with this product. Never use any third party or
unknown accessories or batteries.
To charge the camera:
1. Insert the battery into the camera
2. Connect the USB Charging Cable to the Mini USB port located on the
camera.
3. Connect the USB Charging Cable to a computer or wall charger.
WARNING!: If using a wall charger, ensure that it is a certified product for
your region. AC Input: 100-240VAC 50/60Hz. DC Output: 5VDC 0.5A/1A.
Only use a USB charger with suitable approval and certification. If you
do not know the output voltage/current of the charger use a computer
to charge the battery. Do not charge in conditions outside of the 10°C-
45°C range.
4. The camera status LED will be RED whilst charging. Once charging is
complete the status LED light will switch OFF.
5. A full charge cycle will take approximately 2.5 hours by 0.5A/1A charger.
Battery Tips
To maximise battery life:
• Turn off WiFi
• Turn on LCD Screensaver
• Capture at a lower Video Resolution and frame rate. Higher resolutions and
frame rates impact battery performance.
• Avoid exposing the camera and battery to very cold or hot temperatures.
Cold or hot temperatures may temporarily affect the battery life and cause
the camera to stop working.
• Only ever charge the camera with a compliant wall charger marked 5V/1A.
To Next Page
Loading...
