Video Quality
This setting features 3 options. S.Fine (Super Fine), Fine and Normal. This setting
changes the Video Bitrate and quality of the video. The higher that setting (Super
Fine) the larger the video size.
Please ensure your Memory Card speed can handle the appropriate bitrate when
recording in Super Fine mode.
Default Mode
Select if you would like the camera to start in Video Capture or Photo Capture mode
upon turning it on.
Quick Capture
When enabled this mode will automatically begin recording the moment the camera
is turned on.
EIS – Electronic Image Stabilisation
EIS or Electronic Image Stabilisation is only available when the camera resolution is
set to one of the following settings:
• 1920x1080 60FPS
• 1920x1080 30FPS
EIS helps reduce shakiness and blur when shooting video. When the mode is
enabled there will be an Anti-Shake icon appear in the video capture screen.
Motion Detection
Motion Detection allows the camera to record when it senses any motion within its
field of view.
This mode features 3 levels High, Medium & Low.
It will record for as long as there is any motion within its field of view. To enable this
click the record button. Once enabled the Motion Icon will flash indicating it is in
standby waiting for motion.
After an event or motion detection has cleared the cameras view it will record for
10secs and stop recording until another motion event. The Motion icon will flash red
when it is recording.
To stop motion detection, click the record button.
To Next Page
Loading...
