Photo Mode Settings
To enter Photo Mode, click the Power/Toggle button once on the front of the
camera.
Click the Record/Confirm button to take a photo.
When capturing a photo, the blue status LED on the front of the camera and the
blue power LED on the back of the camera will flash once.
Photo Settings
Photo Resolution.
Photo Quality
This setting features 3 options. S.Fine (Super Fine), Fine and Normal. This setting
changes the photographs bitrate. The higher the setting (Super Fine) the larger the
photo size.
Self Timer Mode
When this mode is enabled, it lets you set intervals for when a single photo is taken
after clicking the Record/Confirm button.
2/3/5/10/30/60 second intervals are available.