Kaiweets HT206D - Non-contact AC Voltage Detection (NCV)

Non-contact AC Voltage Detection (NCV)
/A Make sure that all measuring sockets are free. Remove all test leads and
adapters from the meter. This function only serves as an aid.
1. Turning the rotary dial to any position, hold down the "H/NCV" for more than
2 seconds, "click" a sound, the meter shows the "NCV" character and then enter
the NCV detection function.
2. Then the NCV probe will be approached the detected point gradually.
3. When the signal of weak electromagnetic field is sensed, the character "-
is displayed and there appears slow beeping sound.
4. When the signal of strong electromagnetic field is sensed, the character "-
is displayed and there appears a fast beeping sound.
5. Press more than 2 seconds or turn the rotary function to exit NCV detection
function.
I
yr
22