Need help?Do you have a question about the Kaiweets HT208D and is the answer not in the manual?
General| Continuity Test | Yes |
|---|---|
| Diode Test | Yes |
| Auto Ranging | Yes |
| NCV | Yes |
| True RMS | Yes |
| Weight | 300g |
| Type | Digital Clamp Meter |
| Display | LCD |
| AC Voltage Range | 0.1V - 600V |
| DC Voltage Range | 0.1V - 600V |
| Resistance Range | 0.1Ω to 40MΩ |
| Capacitance Range | 10nF/100nF/1μF/10μF/100μF |
| Frequency Range | 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz |
| Temperature Range | -20°C - 1000°C |
| Safety Rating | CAT III 600V |
| Battery | 2 x AAA |
Essential guidelines to prevent electric shock or personal injury during operation.
Identifies and describes the various parts, buttons, and display of the clamp meter.
Details the function and usage of FUNC, RAN, MAX/MIN, REL/ZERO, and HOLD/Work Light buttons.
Explains how to measure the peak inrush current of electrical devices during startup.
Covers AC current and voltage measurements using the VFD mode for noise filtering.
Explains high and low impedance voltage measurement techniques and their applications.
Instructions for battery replacement, turning the meter on/off, and auto-shutdown.
Explains auto-ranging and the behavior of True-rms meters with AC zero input.
Proper procedure for connecting test leads to the meter for accurate measurements.
Step-by-step instructions for measuring AC and DC current using the clamp meter.
How to measure AC and DC voltage using the clamp meter with test leads.
Method for detecting AC voltage without physical contact using the NCV function.
How to perform live wire detection using the meter's specific function.
Specific instructions on how to clean the meter safely and effectively.
To Next Page
