27
Maintenance
Warning
• To avoid electrical shock, disconnect test leads from the Meter before removing its
back cover� Never use the Meter with the back cover removed�
• Repairs or servicing not covered in this manual should be performed only by qualied
personnel�
Caution
• To avoid contamination or static damage, do not touch the circuit board without proper
static protection�
• If the Meter is not going to be used for a long time, remove the battery� Do not store
the Meter in a high temperature or a high humidity environment�
Cleaning the Meter
• To avoid damaging the meter, do not use abrasives or solvents on this instrument�
• Periodically clean the Meter by wiping it with a damp cloth and mild detergent�
• Do not get water inside the case� This may lead to electrical shock or damage to the
instrument�
• Wipe the contacts in the socket with a clean cotton swab soaked in alcohol�
To Next Page
Loading...
