5
Function Buttons
Press the “FUNC�” key to switch the respective secondary function
between the dierent measurements for the applications accessible
via the function switch such as between AC and DC�
Auto-Ranging by default� Switches to manual mode and cycles
through all ranges� Auto-Ranging restored when pressed for two
seconds�
Press this key to switch between the maximum and minimum
values; Press this key for more than 2 seconds to exit this mode�
Before entering the “MAX/MIN” mode, press the range key to switch
to the most suitable range� After entering this mode, the meter will
automatically enter to manual range mode�
To Next Page
Loading...
