Need help?Do you have a question about the Kaiweets HT206D and is the answer not in the manual?
General| Temperature Range | -20°C to 1000°C |
|---|---|
| Continuity | Yes |
| Data Hold | Yes |
| Safety Rating | CAT III 600V |
| Display | LCD |
| Measurement Functions | Voltage, Current, Resistance, Capacitance, Frequency, Temperature, Continuity |
| Resistance Range | 0-40MΩ |
| Capacitance Range | 0-100µF |
| Frequency Range | 10Hz to 1MHz |
| Battery | 2 x 1.5V AAA |
| Weight | 220g |
How to display and exit minimum and maximum measurement values.
Instructions for activating/deactivating the backlight and work light.
Using the HOLD function to freeze readings and NCV for voltage detection.
Using the Low-Pass Filter to reduce interference in AC voltage measurements.
Understanding and performing voltage measurements with high impedance.
Measuring AC voltages with low impedance to detect phantom voltages.
Procedures for replacing batteries and turning the meter on/off.
Information on the auto-shutdown function and how to disable it.
Explanation of how the meter automatically selects the appropriate measurement range.
Understanding True-RMS meter behavior with AC zero input and potential readings.
Ensuring proper connection of test leads for accurate measurement results.
Steps for accurately measuring AC and DC current using the clamp feature.
Procedure for measuring DC and AC voltages, including safety notes.
How to perform frequency and duty cycle measurements with the meter.
Instructions for measuring electrical resistance in circuits.
Performing continuity tests and interpreting the results, including audible signals.
Guide to measuring capacitance and important safety considerations.
Procedure for testing diodes and distinguishing anode from cathode.
How to measure temperature using the K-type thermocouple attachment.
Using the NCV function to detect AC voltage without direct contact.
To Next Page
