Kaiweets HT206D - Introduction; Safety Information

Introduction
KAIWEETS HT206D is a digital True-RMS clamp meter with automatic range selection.
The Low Impedance (Low-Z) mode can detect and eliminate ghost or stray voltages.
Safety Information
AAWarnings: Read First
To avoid possible electric shock or personal injury, please obey the following instructions:
« Use the Meter only as specified in this manual or the protection provided by the Meter
might be impaired.
+ Avoid working alone so assistance can be rendered.
+ Never measure AC current while the test leads are inserted into the input jacks.
+ Do not use the Meter in wet or dirty environments.
« Inspect the test leads before use. Do not use them if insulation is damaged or metal is
exposed.
« Check the test leads for continuity. Replace damaged test leads before using.
« Use extreme caution when working around bare conductors or bus bars. Contact with
the conductor could result in electric shock.
+ Do not hold the Meter anywhere beyond the tactile barrier.
« When measuring current, center the conductor in the clamp.
3