Kaiweets HT206D - Maintenance

Maintenance
A Warning
« To avoid electrical shock, disconnect test leads from the meter before removing
its back cover. Never use the Meter with the back cover removed.
« Repairs or servicing not covered in this manual should be performed only by
qualified personnel.
A Caution
« To avoid contamination or static damage, do not touch the circuit board without
proper static protection.
« If the Meter is not going to be used for a long time, remove the battery. Do not
store the Meter in a high temperature or a high humidity environment.
Cleaning the Meter
+ To avoid damaging the meter, do not use abrasives or solvents on this instrument.
« Periodically clean the Meter by wiping it with a damp cloth and mild detergent.
+ Do not get water inside the case. This may lead to electrical shock or damage
to the instrument.
+ Wipe the contacts in the socket with a clean cotton swab soaked in alcohol.
25