Kaiweets HT208A - Page 9

Functi Buttons
. Press the “FUNC.” key to switch the respective secondary function
FUNC between the different measurements for the applications accessible
/ via the function switch such as between AC and DC.
Auto-Ranging by default. Switches to manual mode and cycles
through all ranges. Auto-Ranging restored when pressed for two
seconds.
Press this key to switch between the maximum and minimum
values; Press this key for more than 2 seconds to exit this mode.
Before entering the “MAX/MIN” mode, press the range key to switch
to the most suitable range. After entering this mode, the meter will
automatically enter to manual range mode.