Kaiweets KC601 - Page 8

Operating Instructions
Insert and replace the batteries
Replace the batteries immediately when the symbol
" {_N]" appears in the display. Disconnect the meter from
power source. Remove the test leads from the measuring
device, loosen the screws on the back and remove the
lower half of the housing, replace the old batteries and
screw the cover back on.
Turn on/off the meter
1. Press and hold the key for about 2 seconds to turn ol
2. When the measurement is finished, press and hold the'
the meter.
ey for about 2 seconds to switch off
Flashlight on/off
Press the (Z) button and hold for more than 2 seconds to tum the flashlight on or off.
Data hold
Press the (] button to enable or disable the data hold function.
7