Kaiweets KM602 - Page 15

Live wire detecting
(1) Long press for * ()" button about 2 seconds to power on, display Auka and enter the intelligent
measurement mode.
(2) Press " o) button to select "NCV /Live" gear, press the " (=] button to switch to live wire
measurement, the "LIVE" symbol will show on the screen, indicating the Live testing.
(3) Insert the red probe into "INPUT" jack and remove the black probe.
(4) Use the red probe contact the conductor.
(5) When the weak electic field signal is detected, it will display
(6) When the strong electric field signal is detected, it wil display "
" and the buzzer will sound slowly;
H"; the buzzer will sound quickly.
14