Kaiweets KM602 - Page 3

approved rubber gloves, masks and flame retardant clothing, etc.) to prevent injury caused by
electric shock and electric arc when dangerous live conductors are exposed.
© When the "{C§ " symbol is displayed on the meter, please charge battery in time to prevent
measurement error.
© Do not use the meter in the environment with explosive gas or steam or humid environment.
® When using the probe, please hold your fingers behind the probe finger guard.
® When measuring, please connect the null or ground wire first, then the live wire; when
disconnected, please disconnect the live wire first, and then the null or ground wire.
® Remove the probe from the meter before opening the case or battery cover. Do not use the meter
when the meter is disassembled or the battery cover is opened.
® The meter can only be used together with the probe provided to meet the requirements of the
safety standard. If the probe is damaged and needs to be replaced, the probe of the same model
and electrical specification must be replaced.
Safety symbol meaning
Symbols | Description Symbois | Description
WARNING. RISK OF DANGER. A WARNING. RISK OF ELECTRIC SHOCK|
Z Hazardous Voltage [{3 Conforms to European Union directives.
CATH | Suitable for testing circuits directly connected 1o power points (sockets and similarities) of low voltage power
installations
GATI | Sitable for measring circuits connecied to the distibution partof Iow voliage power supply devices in
building.
GATIV_| Suitable for measuring Gircuils connected to the power supply of low voliage power inslallations in buildings.
2