Kaiweets ST600X - Manual Capacitance Measurement; Manual Temperature Measurement

Capacitance Measurement
1) Tum on & Ready to use ( ook at page 8)
2) Press* [ buton or'B" o' 4t
setting, "nF ' signal will be displayed on
the screen, indicating capacitance
testing.
* Before measuring the capacitor, discharge
the capacitor to avoid damage to the Meter.
* If the capacitance is large, it may take a
long time for the reading to stabilize.
Temperature Measurement
1) Turn on & Ready to use ( look at page 8)
2) Insert the positive pole of the K-type
thermocouple into the * {YeR¥2 ' jack
and the negative pole into the ' COM '
jack.
3) Press the '@‘ button or'@‘ to'°CIF '
setting, ' °C "signal and" F " signal will
be displayed on the screen, indicating
temperature testing.
4) Touch to the object being measured.
5) The reading may take few seconds to be
stable.