Kaiweets ST600X - Page 5

Do not touch voltages >30 V AC RMS, 42 V AC peak, or 60 V DC.
Use the correct terminals, function, and range for measurements.
Do not use the Product around explosive gas, vapor, or in damp or wet environments.
Do not operate the Product with covers removed or the case open. Hazardous voltage
exposure is possible.
Examine the case before you use the Product. Look for cracks or missing plastic.
Carefully look at the insulation around the terminals.
Disconnect power and discharge all high-voltage capacitors before you measure
resistance, continuity, capacitance, or a diode junction.
Do not apply more than the rated voltage, between the terminals or between each
terminal and earth ground.
Remove circuit power before you connect the Product in the circuit when you measure
current. Connect the Product in series with the circuit.
Measure a known voltage first to make sure that the Product operates correctly.
2