Kaiweets ST600X - Page 6

Do not use test leads if they are damaged. Examine the test leads for damaged insulation,
exposed metal, or if the wear indicator shows. Check test lead continuity.
Remove the input signals before you clean the Product.
When measuring, please connect the null or ground wire first, then the live wire; when
disconnected, please disconnect the live wire first, and then the null or ground wire.
Remove the probe from the Meter before opening the case or battery cover. Do not use
the Meter when the Meter is disassembled or the battery cover is opened.
The Meter can only be used together with the probe provided to meet the requirements of
the safety standard. If the probe is damaged and needs to be replaced, the probe of the
same model and electrical specification.