5. HIGHLIGHTS OF THE MACHINE
5.1 Storage of the media reels on the shafts of the machines
There are 4 locations on the machine on which the film reels can be stored on their
blocking shafts.
5.2 Feeding tray :
The feeding tray has got a graduation to enable to centre the prints easily. This graduation
is also related to the one on the self locking shafts.
Pivoting feeding tray : the feeding tray can be lifted up for easy access to the machine
while installing the media or cleaning.
The tray is linked to a safety switch. When in upper position, the driving motor is shut off
and the rollers cannot start. However, it is still possible to lift the roller up and down.
When taken back in working position, press the safety reset key (Rep. 8) on the control
board, and the machine is ready to work.
Squaring guide : A sliding squaring guide is provided with the tray. This guide is lockable
on the table by screwing its button.
It is practical for repetitive jobs with plates.
Paper guide : A removable paper guide is provided to help the insertion of the prints in the
laminator. To position it, slide it in the plastic guides on both ends of the feeding tray.
To Next Page
Loading...
Need help?
General
