Kalerm KLM1601 - Setting Beverage Parameters and Range; Temperature Setting

10
Beverage setting
This chapter will instruct you how to set beverages. The setting parameters
include coffee strength, volume of coffee, temperature of hot water,
volume of hot water, time of making hot milk, time of making hot cream.
The parameters accomplished by beverage setting will be the default
values for each beverage.
1. Epresso setting
2. Long coffee setting
3. Hot water setting
4. Cappuccino setting
5. Coffee latte setting
6. Hot milk setting
7. Hot cream setting
●
●
Setting beverage parameters and range
Drinks
espresso
Mild:
Normal:
Strong:
Mild:
Normal:
Strong:
Volume: 25 -120ML
Volume: 25 - 240ML
long coffee
cappuccino
Volume: 25 - 240ML
Milk time: 3 - 120SEC
Cream tiem: 3 - 120SEC
coffee Latte
hot milk Milk time: 3 -120SEC
hot water
hot cream Cream time: 3 -120SEC
Volume: 25 -450ML
Strength Volume
The parameters as strength, volume, temperature and time can be set for
the beverages bellow.
Please read the following table for the detail setting parameters and
adjustment range
The strength and volume of espresso can be set
The strength and volume of long coffee can be set
The strength and volume of coffee part in cappuccino can be set. Milk
foam making time can be set
The strength and volume of coffee part in latte can be set. Milk and milk
foam making time can be set
The temperature and the volume of hot water can be set
Hot milk making time can be set
Hot cream making time can be set
●
●
●
●
●
●
●
Temperature Setting
The coffee temperature can be adjusted to meet your favor with the “ Temperature setting”
function and you can choose:
●
1 .Low
2 .Middle
3 .High
The default temperature is middle, and it’s only workable for coffee not milk.