What to do if my Kalerm Coffee Maker has a dirty water sensor in front of the drip tray?
If the water sensor in front of the drip tray of your Kalerm Coffee Maker is dirty, clean the water sensor.
What to do if my Kalerm KLM1601 needs to be repaired when there is ERROR on the screen?
If your Kalerm Coffee Maker displays an error on the screen, try restarting the machine.
What to do if the drip tray cannot be installed in my Kalerm Coffee Maker?
If the drip tray of your Kalerm Coffee Maker cannot be installed, it might be due to coffee powder on the base. Remove the drip tray and check for coffee powder on the base, then clean it.
How to fix water leakage from the bottom of Kalerm Coffee Maker when taking out or filling in water tank?
If you notice water leaking from the bottom of your Kalerm Coffee Maker when handling the water tank, the valve body may be stuck. Try moving the valve body to reset it.
What to do if external parts are broken or damaged in my Kalerm KLM1601 Coffee Maker?
If any external parts of your Kalerm Coffee Maker are broken or damaged, replace them if necessary.
What to do if my Kalerm Coffee Maker has damaged components?
If components of your Kalerm Coffee Maker are damaged, replace components.
How to fix foam rubber if it can not be installed in Kalerm Coffee Maker?
If the foam rubber cannot be installed in your Kalerm Coffee Maker, confirm that it is being installed correctly.
What to do if there are lots of coffee powder left on the base of my Kalerm KLM1601 Coffee Maker?
If there is a lot of coffee powder left on the base of your Kalerm Coffee Maker, clean the remaining coffee powder.
Why is the powder container cover on my Kalerm Coffee Maker not closing tightly?
If the powder container cover on your Kalerm Coffee Maker is not closing tightly, there might be coffee powder left below the cover. Clean the remaining coffee powder.
What to do if my Kalerm KLM1601 Coffee Maker has a damaged power cord?
If the power cord of your Kalerm Coffee Maker is damaged, replace it.
General safety advice for using the coffee machine to avoid hazards.
Important warnings about machine misuse and potential damage or hazards.
List of actions strictly forbidden to prevent damage, injury, or voiding warranty.
Tips to prevent personal injury, especially from electric shock.
How to connect power, position the machine safely, and avoid tripping hazards.
Steps for powering on, self-testing, and the initial cleaning cycle.
Disassembling, cleaning, and reassembling the milk frother and pipe.
Reasons for descaling and precautions when using decalcifier.
How to start and complete the descaling program, noting its duration.
Steps for adding decalcifier, running rinse cycles, and refilling the water tank.
Addressing grinder noises and milk frother malfunctions.
Solutions for high/low temperature, pressure, and general error messages.
General| Type | Automatic Coffee Machine |
|---|---|
| Product Name | Kalerm KLM1601 |
| Category | Coffee Maker |
| Bean Container Capacity | 250 g |
| Pump Pressure | 15 bar |
| Coffee Grounds Container Capacity | 10 servings |
| Adjustable Coffee Strength | Yes |
| Adjustable Water Amount | Yes |
| Adjustable Coffee Temperature | Yes |
| Display | LCD |
| Milk Frother | Yes |
| Hot Water Function | Yes |
| Self-Cleaning Function | Yes |
| Voltage | 220-240V |
| Feature | Programmable |
| Material | Plastic and Stainless Steel |
| Filter Type | Permanent |
| Power | 1450 watts |
To Next Page
