To Next Page
D
davisamySep 1, 2025
What to do if my Kalerm KLM1601 Coffee Maker has a damaged power cord?
- JJennifer DorseySep 1, 2025
If the power cord of your Kalerm Coffee Maker is damaged, replace it.
What to do if my Kalerm KLM1601 Coffee Maker has a damaged power cord?
If the power cord of your Kalerm Coffee Maker is damaged, replace it.
What to do if my Kalerm KLM1601 Coffee Maker has coffee grounds blocking the brew unit?
If coffee grounds are blocking the brew unit of your Kalerm Coffee Maker: 1. Power the machine on and off more than two times. 2. If the tray still cannot be removed, disassemble and clean the coffee grounds inside the brew unit.
What to do if the drip tray cannot be taken out of my Kalerm KLM1601?
If the drip tray of your Kalerm Coffee Maker cannot be removed, the export might be blocking it. Move the export up.
Why is the coffee temperature too low in my Kalerm KLM1601 Coffee Maker?
If the coffee temperature is too low when using your Kalerm Coffee Maker, preheat the coffee cup or increase the ambient temperature.
What to do if water is leaking between the water inlet valve and water tank in Kalerm KLM1601?
If water is leaking between the water inlet valve and the water tank of your Kalerm Coffee Maker, replace or repair the water inlet valve seal.
What to do if my Kalerm Coffee Maker has low water volume?
If the volume of hot water from your Kalerm Coffee Maker is too low, the machine may need descaling. Deposit buildup might be clogging the internal pipes.
How to fix water leakage from the bottom of Kalerm Coffee Maker when taking out or filling in water tank?
If you notice water leaking from the bottom of your Kalerm Coffee Maker when handling the water tank, the valve body may be stuck. Try moving the valve body to reset it.
What to do if the drip tray cannot be installed in my Kalerm Coffee Maker?
If the drip tray of your Kalerm Coffee Maker cannot be installed, it might be due to coffee powder on the base. Remove the drip tray and check for coffee powder on the base, then clean it.
What to do if my Kalerm KLM1601 needs to be repaired when there is ERROR on the screen?
If your Kalerm Coffee Maker displays an error on the screen, try restarting the machine.
General safety advice for using the coffee machine to avoid hazards.
Important warnings about machine misuse and potential damage or hazards.
List of actions strictly forbidden to prevent damage, injury, or voiding warranty.
Tips to prevent personal injury, especially from electric shock.
How to connect power, position the machine safely, and avoid tripping hazards.
Steps for powering on, self-testing, and the initial cleaning cycle.
Disassembling, cleaning, and reassembling the milk frother and pipe.
Reasons for descaling and precautions when using decalcifier.
How to start and complete the descaling program, noting its duration.
Steps for adding decalcifier, running rinse cycles, and refilling the water tank.
Addressing grinder noises and milk frother malfunctions.
Solutions for high/low temperature, pressure, and general error messages.
General| Type | Automatic Coffee Machine |
|---|---|
| Product Name | Kalerm KLM1601 |
| Category | Coffee Maker |
| Bean Container Capacity | 250 g |
| Pump Pressure | 15 bar |
| Coffee Grounds Container Capacity | 10 servings |
| Adjustable Coffee Strength | Yes |
| Adjustable Water Amount | Yes |
| Adjustable Coffee Temperature | Yes |
| Display | LCD |
| Milk Frother | Yes |
| Hot Water Function | Yes |
| Self-Cleaning Function | Yes |
| Voltage | 220-240V |
| Feature | Programmable |
| Material | Plastic and Stainless Steel |
| Filter Type | Permanent |
| Power | 1450 watts |
