To Next Page
W
William BriggsSep 12, 2025
What to do if my Kalerm Coffee Maker brew unit does not reset?
- JJasmine BrownSep 12, 2025
If the brew unit of your Kalerm Coffee Maker does not reset, take out the coffee grounds container and reinstall the drip tray.
What to do if my Kalerm Coffee Maker brew unit does not reset?
If the brew unit of your Kalerm Coffee Maker does not reset, take out the coffee grounds container and reinstall the drip tray.
What to do if there are lots of coffee powder left on the base of my Kalerm KLM1601 Coffee Maker?
If there is a lot of coffee powder left on the base of your Kalerm Coffee Maker, clean the remaining coffee powder.
How to fix foam rubber if it can not be installed in Kalerm Coffee Maker?
If the foam rubber cannot be installed in your Kalerm Coffee Maker, confirm that it is being installed correctly.
What to do if my Kalerm Coffee Maker displays System testing Malfunction?
If your Kalerm Coffee Maker shows a system testing malfunction, restart the machine.
What to do if the water tank does not install in place in my Kalerm KLM1601?
If the water tank of your Kalerm Coffee Maker does not install correctly, try placing it again.
Why won't my Kalerm Coffee Maker power on?
If your Kalerm Coffee Maker won't power on, the issue might be due to an improper voltage. Ensure you are using the correct voltage for your machine.
What to do if my Kalerm Coffee Maker needs descale?
If your Kalerm Coffee Maker needs descaling, proceed with the descaling process.
How to adjust the coffee powder if it is too rough in my Kalerm KLM1601 Coffee Maker?
If the coffee powder is too rough when using your Kalerm Coffee Maker, adjust the grinder to the finest setting.
Why is the powder container cover on my Kalerm Coffee Maker not closing tightly?
If the powder container cover on your Kalerm Coffee Maker is not closing tightly, there might be coffee powder left below the cover. Clean the remaining coffee powder.
How to fix the coffee export if it falls off my Kalerm Coffee Maker?
If the coffee export falls off your Kalerm Coffee Maker, the sliding panel of the export may be damaged. Replace the sliding panel of the coffee export, using item number 79000051.
General safety advice for using the coffee machine to avoid hazards.
Important warnings about machine misuse and potential damage or hazards.
List of actions strictly forbidden to prevent damage, injury, or voiding warranty.
Tips to prevent personal injury, especially from electric shock.
How to connect power, position the machine safely, and avoid tripping hazards.
Steps for powering on, self-testing, and the initial cleaning cycle.
Disassembling, cleaning, and reassembling the milk frother and pipe.
Reasons for descaling and precautions when using decalcifier.
How to start and complete the descaling program, noting its duration.
Steps for adding decalcifier, running rinse cycles, and refilling the water tank.
Addressing grinder noises and milk frother malfunctions.
Solutions for high/low temperature, pressure, and general error messages.
General| Type | Automatic Coffee Machine |
|---|---|
| Product Name | Kalerm KLM1601 |
| Category | Coffee Maker |
| Bean Container Capacity | 250 g |
| Pump Pressure | 15 bar |
| Coffee Grounds Container Capacity | 10 servings |
| Adjustable Coffee Strength | Yes |
| Adjustable Water Amount | Yes |
| Adjustable Coffee Temperature | Yes |
| Display | LCD |
| Milk Frother | Yes |
| Hot Water Function | Yes |
| Self-Cleaning Function | Yes |
| Voltage | 220-240V |
| Feature | Programmable |
| Material | Plastic and Stainless Steel |
| Filter Type | Permanent |
| Power | 1450 watts |
