Kalerm KLM1601 - Adding and Rinsing Decalcifier

15
7
4
5
6
DECALCIFYING
SOLVENT IN TANK
PRESS RINSE
PRESS RINSE
FILL WATER TANK
3
DECALCIFYING
Cleaning and maintenance
Take a bag of decalcifier and sufficiently
dissolves it in clean water, then put this
mixed liquid to the water tank, and reinstall
the water tank to coffee machine.
After adding decalcifier, press cleaning
button to start descaling and cleaning.
To start descaling and cleaning for the first
time, put a container, of which the
capacity is more than 1L, under the coffee
spout.
After descaling and cleaning for the first
time, take the water tank out, empty the
rest water and clean it. Add purified water
again, and reinstall it to the coffee
machine
Press cleaning button to enter descaling
and cleaning for the second time. To clean
the residual decalcifierin water in pipes at
this time . Put a container, of which the
capacity is more than 1L, under the coffee
spout.
Decalcifying.
READY
When the screen shows “READY”, it indicates
the descaling is completed; Now, you can
continue to make coffee.
Please empty the drip tray after the cleaning program is completed.
EMPTY TRAY
INSTALL TRAY
Install tray.
Empty tray.