Kalerm KLM1601 - Powering On and Initial Cycle; Powering Off Procedures

06
Power on
As the machine has been tested at factory, there may be a
little coffee powder left . We promise the machine is
brand new.
The coffee machine will start self-testing and cleaning at the
first-time use, this helps the coffee machine achieve the
best working condition, and this process cannot be skipped
●
●
Every time powering on the coffee machine, it will automatically
complete heating and cleaning for one time, and the
process cannot be stopped. The coffee machine can only
be used after finished the above cycle process.
During the cleaning process, some hot water may flow out of
the coffee spout into the drip tray. Please avoid contacting
the spilling hot water.
Please ensure the power is connected before pressing
power button.
●
●
First-time use
Power off
READY
Every time when powering off the coffee machine, it will
automatically complete cleaning process for one time, and
the process cannot be stopped. This operation is to clean up
the coffee pipelines and remove the coffee grounds.
During the cleaning process, some hot water will flow out of
the coffee spout into the drip tray. Avoid touching spilt hot
water, so as not to be burned.
Only after using milk/cream/cappuccino/lattee, the Rinse
Milk Unit function will be operated when power off.
When you press power button, the machine will be
power off after auto cleaning.
●
●
●