DCW BedienA Pedelec_RZ5.qxd
● The charger can only be connected to a 220-230 V socket.
● Avoid prolonged direct skin contact with the charger during the charging process.
During this time the device heats up to about 40-60°C. Risk of burns!
● The charger should only be set up in a secure stable position on a suitable surface.
● Do not cover the charger or place objects on it - risk of overheating or fire!
Self diagnosis
The control unit of the control panel has a
self-diagnosis mode. With the aid of self-diagnosis, any
improper function of the electrical system can be determined.
The error code is identified by different modes of blinking (number and
frequency) of the diodes.
To Next Page
Loading...
