9
Place the removable lid onto
the soup maker. If using ‘PULSE’
setting after making “SMOOTH’
or ‘CHUNCKY’ soup, begin
here.
Press the ‘SETTINGS’ button
four times. The red light above
‘PULSE’ setting will flash.
Press and hold the ‘START’
button for as long as blending
is required.
How to blend- using the ‘BLEND’ setting (Continued)
Place the removable lid onto
the soup maker. If using ‘BLEND’
setting after making “SMOOTH’
or ‘CHUNCKY’ soup, begin
here.
Press the ‘SETTINGS’ button
three times. The red light above
‘BLEND’ setting will flash.
Press the ‘START’ button.
The soup maker will blend
intermittently for 2 minutes.
How to pulse- using the ‘PULSE’ setting
Wash and rinse the inside of the
soup maker. Wash the blending
blades with warm soapy water.
Do not immerse the motor
body/lid in water.
Dry thoroughly.
Plug the removable power cord
into the stainless steel housing.
Plug power cord into a 230V or
240V power outlet and switch
‘ON’.
Place ingredients to be cooked
into the soup maker and stir
with a spoon until well mixed.
1.
4.
4.
2.
5.
5.
3.
6.
6.
To Next Page
Loading...
Need help?
General
