Kambrook Soup Simple KBL600 User Manual

15
NOTE: After using the BLEND
setting and the motor body/
lid is removed, steam may be
found near the blending shaft.
This steam is normal and will
eventually cease.
NOTE: If more blending is
required, you can repeat
the setting or use the ‘PULSE’
setting.
9. Clean the soup maker following
instructions on Page 19.
Using the Pulse Function
To use the ‘PULSE’ setting, follow the
instructions below:
1. Ensure that the removable power
cord is not plugged in to the soup
maker or the power outlet.
2. Carefully remove the motor body/
lid, being careful not to touch the
blending blades (See Fig. 8).
Fig. 8
3. Place the ingredients into the
soup maker as per the recipe
being followed.
4. Ensure that the food contents
and liquid fill up between the
‘MIN’ and ‘MAX’ marks shown on
the inside of the soup maker (See
Fig. 9). Give all the ingredients a
good stir.
Fig. 9
NOTE: The soup maker
will make a “beep” sound
continuously and display ‘E3’
(error) on the digital control
panel if under filled, or ‘E1’
(error) on the display control
panel if over filled.
5. Place the motor body/lid back
onto the soup maker, ensuring
that it is securely in place
(See Fig. 10).
Fig. 10

Kambrook Soup Simple KBL600 Specifications

General

Brand	Kambrook
Model	Soup Simple KBL600
Category	Blender
Language	English