1. Introduction
The KanexPro EXT-NETAV is a total solution package for those looking to
distribute multiple HD content to multiple HD displays over IP with an easy
to use built-in controller over a standard 1G network switch.
Compliant with HDCP, this set of Sender and Receiver offers configurable
high quality, low-bandwidth H.264 compression video supporting resolutions
up to 1920x1080@60fps. It’s a great solution for those looking to upgrade
the traditional DVI/HDMI matrix switchers.
2. Features
● Encode & Decode AV over IP up to 495ft. (120m)
● Create a Video Wall or a Multiview experience with 100's of screens
● Unicast, Multicast, Matrix, Video Wall and Multi-viewer (up to 5 windows)
● Unlimited scalability (based on network topology)
● Low 1.5 frames per second latency
● Video resolution up to 1080p/60Hz (4:4:4)
● Supports Audio Embedding on the Sender
● Supports Audio De-embedding on the Receiver
● Works with 1G standard managed network switch
● Works with IP Camera
● H.264 Encoding/Decoding compression
● Local HDMI output on sender
● Control via RS-232 & Web-based GUI controller built-into the Sender
● POE - No power supply needed if using POE managed network switch
● Compact design for an easy and flexible installation to rack
● Backed by KanexPro 3-year parts and labor warranty
R
4
3. Package Contents
1 x NetworkAV™ Decoder
1 x DC 12V Power Adaptor
1 x User Manual
EXT-NETAVRX_V1.0
To Next Page
Loading...
