Why can't I control KanexPro HDMMX88-4K by RS232 / IR remote / front panel buttons?
If you cannot control the KanexPro Switch by RS232, IR remote, or front panel buttons, the device may be broken. Send it to an authorized dealer for repairing.
General| Type | HDMI Matrix Switcher |
|---|---|
| Category | Switch |
| Input Ports | 8 |
| Output Ports | 8 |
| HDCP Support | HDCP 2.2 |
| Video Bandwidth | 18 Gbps |
| HDMI Compliance | HDMI 2.0 |
| Color Depth | Up to 12-bit |
| Resolution Support | 4K Ultra HD |
| Video Resolutions | Up to 4K@60Hz (3840x2160) |
| Audio Formats | Dolby TrueHD, DTS-HD Master Audio |
| Audio Support | LPCM, DTS, Dolby Digital |
| Control | RS-232, IR |
| Dimensions | 17.3 x 1.7 inches |
| EDID Management | Advanced EDID Management |
Lists the key features and specifications of the modular matrix switcher.
Describes the various input and output signal cards supported by the switcher.
Details the components and controls on the front panel of the switcher.
Explains the various ports and connectors on the rear panel of the switcher.
Lists and explains the commands used for RS232 control of the switcher.
Guides on controlling the switcher using TCP/IP software, with an example.
Explains how to configure TCP/IP settings for the switcher via its web server.
Details the specifications for various changeable input/output cards.
Details the specifications for the 4I-DV and 40-DV DVI input/output cards.
To Next Page
