Need help?Do you have a question about the KANSAI SPECIAL DFB-1412PS and is the answer not in the manual?
General| Brand | KANSAI SPECIAL |
|---|---|
| Model | DFB-1412PS |
| Category | Sewing Machine |
| Language | English |
Adjusts the needle bar height for proper needle insertion into the needle plate.
Guides the installation and clearance adjustment of the looper and looper holder.
Details the timing adjustments between the needle bar and the looper for correct stitch formation.
Explains how to install the needle guide and set clearances with loopers.
Describes how to align the spreaders for correct thread movement and stitch formation.
Specifies the correct relative positioning between the looper and spreaders.
Details the correct height adjustment for the feed gear rack.
Explains how to align the feed gear rack parallel to the needle plate.
Sets the height of the feed teeth relative to the needle plate.
Adjusts the needle bar height for optimal needle plate interaction.
Covers looper installation and clearance adjustment with needles.
Synchronizes the timing between the needle bar and looper for proper stitch formation.
Adjusts the looper's angle to align with the needle center.
Sets the timing for the rear puller mechanism relative to the needle bar.
Explains how to use the inner and outer cams for ornament stitching.
Details the procedure for replacing the inner cam.
Guides the timing adjustment of the inner and outer cams for spreader movement.
Specifies the correct height setting for the feed teeth.
Details the procedure for adjusting the needle bar height.
Lists presser types for DFB-1012P and DFB-1412PS models.
Details the fixed step presser for the DFB-1012PSM model.
Lists presser types for the DFB-1412PSM model.
Identifies the flat presser for the DFB-1412P model.
Lists specific parts for the DFB-1412PSM model.
Lists specific parts for the DFB-1012PS model.
Lists specific parts for the DFB-1412PQ model.
Lists specific parts for the DFB-1412PQSM model.
Lists specific parts for the DFB-1012PS-SM model.
Lists parts related to brackets and tension mechanisms.
Lists parts for thread guides and eyelets.
Lists parts for cams and spreaders.
Lists parts for the gear housing and associated bushings.
Lists parts related to the cam mechanism and levers.
Lists parts for connecting bars and ball joints.
To Next Page