KANSAI SPECIAL DFB1412P User Manual

INSTRUCTION 
Industrial   Sewing   Machines
Sixth edition : January 2004
No. 030203
DFB1404P,PMD
DFB1412P,PQ,PS
DFB1412PSM,PTV
DFB1012P,PSM,PQ
DFB1402MR
DFB1412MR

KANSAI SPECIAL DFB1412P Specifications

General

Brand	KANSAI SPECIAL
Model	DFB1412P
Category	Sewing Machine
Language	English

Summary

2 Needles and Threading

2-2 Needle Replacement Procedure

Provides instructions on how to safely replace a sewing machine needle.

2-3 Machine Threading Instructions

Step-by-step guide for threading the sewing machine correctly.

4 Lubrication and Maintenance

4-1 Recommended Lubricating Oil

Specifies the type of oil to use and its part number.

4-2 Filling the Machine with Oil

4-3 Oil and Filter Replacement

6 Looper Timing to Needles

6-1 Looper Angle and Holder Bracket Positioning

Details how to set the looper angle and position for correct timing.

6-2 Looper Left-to-Right Movement Adjustment

Explains adjustment for the looper's side-to-side movement relative to needles.

6-3 Looper to Needle Distance Setting

Describes how to set the distance between the looper point and needle center.

6-4 Needle Height Adjustment

7 Retainer Looper Timing Adjustment

7-1 Retainer Looper Positioning

How to correctly position the retainer looper for proper timing.

7-2 Retainer Looper to Needle Timing

Details the timing adjustment of the retainer looper relative to the needle.

8 Needle Guard Adjustment

8-1 Needle Guard Positioning

9 Feed Dog and Stitch Length

9-1 Feed Dog Height and Tilt Adjustment

9-2 Stitch Length Adjustment

10 Presser Foot Adjustments

10-1 Presser Foot Pressure Setting

10-2 Presser Foot Positioning

13 Stitch Formation Adjustments

13-1 Thread Tension Adjustment Guide

Guidance on adjusting needle and looper thread tension.

13-4 Looper Thread Eyelet Position and Timing

14 PSM Mechanism Operations

14-3 PSM Cam Replacement Procedure

14-4 PSM Spreader Timing Adjustment

How to adjust the timing of the spreader mechanisms.

14-5 PSM Spreader Adjustment Details

Details on adjusting the clearance and tilt of the spreaders.

15 PTV Mechanism Adjustments

15-3 Binder Finger Positioning

17 MR Adjustment Procedures

17-1 MR Low Stripper Blade Adjustment

Instructions for adjusting the height and position of the low stripper blade.

17-2 MR Ruffling Arm Set Adjustments

17-3 MR Ruffling Arm Timing Adjustment

How to adjust the timing of the ruffling arm.

18 Daily Machine Cleaning Procedures