Need help?Do you have a question about the KANSAI SPECIAL DVK1702BK and is the answer not in the manual?
General| Stitch Type | Coverstitch |
|---|---|
| Needle Positions | 3 |
| Built-in Free Arm | No |
| Stitch Length | 4mm |
| Presser Feet | 3 |
| Weight | 5.5kg |
Select appropriate needles based on fabric and thread type.
Correctly thread needles and loopers to prevent stitching issues.
Fill the machine with oil and verify oil flow.
Set looper angle and height correctly for proper timing.
Adjust looper's lateral travel distance using the eccentric mechanism.
Set distance from looper point to right needle.
Adjust needle bar height relative to the looper.
Ensure correct clearance between needles and looper.
Adjust the machine's stitch length using the designated screw.
Set clearance between upper and lower knives.
To Next Page