Need help?Do you have a question about the KANSAI SPECIAL DVK1702B and is the answer not in the manual?
General| Brand | KANSAI SPECIAL |
|---|---|
| Model | DVK1702B |
| Category | Sewing Machine |
| Language | English |
Shows how to identify model, serial number, and manufacture date.
Guide to selecting the correct needles for different fabrics and threads.
Instructions on safely replacing a needle, checking its orientation.
Step-by-step guide to correctly thread the machine for optimal stitching.
Details recommended speeds and pulley rotation direction for operation.
Guidance on selecting the appropriate motor pulley for desired machine speed.
Specifies the type of oil to use and its part number.
Instructions on filling the machine with oil and checking its flow.
Procedure for replacing oil and filter element for machine maintenance.
Technical drawing with dimensions for preparing the machine table.
Steps to mount the sewing machine head onto the table.
Specifies correct looper angle and height for different DVK models.
How to adjust the lateral movement of the looper for needle clearance.
Setting the looper's distance from the needle at its extreme travel.
Adjusting the needle bar height relative to the looper.
Adjusting front-to-back clearance between needle and looper.
Adjusting the position of the rear needle guard.
Aligning the front needle guard with the needle eye.
Setting the correct height and tilt of the feed dog.
How to adjust the stitch length using a T-wrench.
Adjusting the pressure of the presser foot for optimal fabric feed.
Positioning the presser foot and setting the foot lift height.
Aligning the thread support with the thread eyelet.
Adjusting looper thread eyelet position for thread supply.
Ensuring correct disengagement of the looper thread from the take-up.
Using the manual lever to position or remove fabric.
Adjusting the pressure of the rear puller for smooth feeding.
Matching the rear puller's feed amount to the feed dog.
Inserting elastic and adjusting front puller feed.
Setting height and tilt for the auxiliary feed dog.
Instructions for installing the auxiliary presser foot.
Adjusting the clearance between the upper and lower knives.
Steps for disassembling and reassembling the lower knife mechanism.
Steps for disassembling and reassembling the upper knife mechanism.
Ensuring correct overlap between upper and lower knife cutting edges.
Guidance on resharpening or replacing dull knives.
To Next Page