Kantech kt-100 User Manual

WARNING: This manual contains information on limitations regarding product use
and function and information on the limitations as to liability of the manufacturer.
The entire manual should be carefully read.
KT-100
™
Door Controller
Installation Manual
Kantech Systems - Access Control and Accessories
DN5073-0205-0207

Kantech kt-100 Specifications

General

Brand	Kantech
Model	kt-100
Category	Network Router
Language	English

Summary

KT-100 Features Overview

Speed Selection

Automatically detects the loop communication speed set at the system workstation.

Trouble Reporting

Supervises power supply conditions and reports 'Low power' status to the system.

Downloadable Firmware

Firmware program stored in flash memory can be updated from the system's workstation.

Integration with Client Alarm System

Allows arming/disarming of client alarm systems and enhances security with keypads.

Mounting and Wiring the KT-100 Door Controller

Step 1: Unpacking the KT-100

Instructions for unpacking the KT-100 controller and verifying package contents.

Step 2: Selecting a Mounting Location

Guidelines for choosing an ideal indoor installation location for the controller.

Step 3: Installing the Power Supply

Guidance on installing the suggested KT-PC4204 power supply unit.

Step 4: Installing the KT-100 Unit

Illustrates typical door layout and considerations for door handle installation.

Door Handle Configuration

Specific instructions on door handle configuration for access control and safe exit.

Door Closer Importance

Explains the role of door closers in preventing alarms and ensuring proper operation.

Door Contact Supervision

Details the function and supervision of door contact sensors for security.

Exit Detector and Button Function

Explains the role of exit detectors and buttons for user exit.

Local Door Alarm Functionality

Describes the integrated local alarms for abnormal conditions.

Reader and Keypad Security

Discusses security implications of reader and keypad configurations.

Step 5: Connecting the Door Locking Device

Wiring instructions for connecting door locking mechanisms to the controller.

Step 6: Hooking up Inputs

How to connect and supervise input zones for sensors and detectors.

Connecting Inputs to Terminals

Connecting devices to input terminals Z1-Z4 and COM.

Connecting Entry and Exit Readers

Diagram and notes for connecting entry and exit readers.

Step 7: Connecting Readers and Keypads

Considerations for connecting readers and keypads to the controller.

Step 8: Connecting Control Relay Outputs

Instructions for connecting control relay outputs for various functions.

Step 9: Connecting the Tamper Switch

Instructions for installing and connecting the tamper switch for cabinet security.

Step 10: Connecting to the RS-485 Bus

Wiring the controllers for RS-485 network communication.

Linking KT-100 Door Controllers

Instructions for connecting multiple KT-100 units on the RS-485 bus.

Appendix: Typical KT-100 Wiring Diagram

Typical KT-100 Wiring Diagram

Detailed wiring diagram illustrating system connections for the KT-100.

KT-100 Compliance Notices

Troubleshooting Communication Problems

Enabling Default Initialization (Hard Reset)

Procedure for performing a hard reset on the controller.

KT-100 Controller Maintenance

Bi-annual Battery Test

Procedure to test battery backup performance for one hour.

Annual Lithium Battery Test

Procedure to test the lithium battery voltage.

Mounting the KT-PC4204 Power Supply

Mounting and Connecting the Power Supply

Steps to mount the PC4204 and connect the power supply unit.

Using the KT-100 with an External Alarm Panel

Interfacing with an External Alarm Panel

Connecting inputs and outputs for alarm system integration.