Kantech kt-100 - KT-100 Features Overview; Speed Selection; Trouble Reporting; Mounting and Wiring the KT-100 Door Controller

Table of contents
Section 1: KT-100 Features 3
Section 2: Mounting and Wiring the KT-100 Door
Controller 5
Step 1•Unpacking the KT-100 ..............................................5
Step 2•Selecting a Mounting Location .................................5
Step 3•Installing the Power Supply ......................................5
Step 4•Installing the KT-100 Unit ........................................5
Step 5•Connecting the Door Locking Device ......................6
Step 6•Hooking up Inputs .....................................................6
Step 7•Connecting Readers and Keypads .............................7
Step 8•Connecting Control Relay Outputs ...........................7
Step 9•Connecting the Tamper Switch .................................7
Step 10•Connecting the KT-100 to the RS-485 Bus ............8
Section 3: Appendix 9
Typical KT-100 Wiring Diagram ............................... 9
KT-100 Compliance Notices ................................... 10
Troubleshooting Communication Problems ........ 10
KT-100 Controller Maintenance ............................. 11
Bi-annual test for battery ............................................11
Annual test for emergency lithium battery .................11
Mounting the KT-PC4204 ....................................... 11
Using the KT-100 with an external alarm panel ... 12