Kanto ORA4 - Connecting Bluetooth

Connecting Bluetooth
®
Bluetooth
®
Operation
1. We recommend keeping a maximum distance of 10 meters between the speaker and
your device. The best signal delity is within this range.
2. Take note of the following behavior and functionality during Bluetooth
®
operation.
When you are successfully connected, the Blue LED will be lit solid, and your device will
show as connected to ‘ORA/ORA4 by Kanto’.
• The connection does not remain active while in other inputs.
3. ORA/ORA4 speakers feature a Bluetooth
®
Pairing button on the back of the active
speaker (right) to quickly disconnect a paired device and allow a second device to pair
with the speaker.
• Press the Bluetooth
®
Pairing button to disconnect a paired device.
• Follow the pairing instructions to pair another device.
Bluetooth
®
Pairing
ORA/ORA4 features Bluetooth
®
5.0 and can be paired with many devices for wireless audio
playback from your phone, smart home device or tablet. Pairing is easy.
1. Press the volume knob and cycle through the inputs until the status light is blue. The
Bluetooth
®
LED (blue) will ash to indicate that ORA/ORA4 is in pairing mode. If the light
is solid, then the ORA/ORA4 is already connected to a device. If you wish to connect to
another device, press the Bluetooth
®
pairing button ( ) on the back of the ORA/ORA4 to
put it in pairing mode.
2. Enable your Bluetooth
®
device to search for a new device to pair with. Select ‘ORA/ORA4
by Kanto’ from the list of Bluetooth
®
devices available for pairing.
7