Kanto SYD6 - Specifications

11
Supporting your digital lifestyle
™
Specifications
SYD6 POWERED SPEAKER SYSTEM
Tweeters 1 inch Silk Dome
Woofers 5.25 inch Kevlar
Nominal Impedance 4 Ohm
Sensitivity 2.83V (/1W/1m) 87 dB
Amplifier Type Class D
Power Output 40 Watts RMS per channel
Input Sensitivity 550 mV
Total Harmonic Distortion < 0.3%
Crossover System 2-way
Crossover Frequency 2.0 kHz
Frequency Range 20 Hz - 20 kHz
Frequency Response 50 Hz - 10 kHz ± 6 dB
Inputs 1 x 3.5 mm stereo mini-jack AUX
1 x RCA L/R
2 x Optical (Toslink)
1 x Bluetooth 4.0 (Supports aptX CODEC)
Outputs 1 x Subwoofer
1 x USB Charge Port 5 V 2.1A
Input Voltage / Frequency AC 100 V - 240 V 50/60 Hz (auto switching)
Standby Power Consumption < 0.5 W
Remote Included
Dimensions W 21.3”x H 6.9” x D 8.9” (540 x 175 x 225 mm)
Net Weight 18.6 lbs (8.4 kg)
Gross Weight 22.8 lbs (10.3 kg) (boxed)
NOTICE: The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Kanto Distribution Inc. is under license.