INTRO
5
PMODE (KAM only). When set to NONE as default, the KAM will be in the Packet Mode. This com-
mand allows you to have your KAM come on in the mode you select. Optional parameters are:
ASCII, AMTOR, CW, FEC, RTTY, NAVTEX and NONE (Packet). Starting the KAM in the Kiss or Host
Mode is accomplished with the INTFACE command (INTFACE will override PMODE). As with all
commands this must be PERMed for the KAM to remember it after being turned off (if not using
the Battery Backup or SmartWatch.
To Next Page
Loading...
