7
• Do not remove or deface warning labels on the laser level.
• Do not disassemble the laser level, laser radiation can
cause serious eye injury.
• Do not drop the laser.
• Do not use solvents to clean the laser.
• Do not use in temperatures below -10°C or above 45°C
(14°F / 113°F)
• Do not operate the laser in explosive atmospheres such as
ammable liquids, gases or dust. Sparks from the tool can
cause ignition.
• When not in use, turn off the power, engage the pendulum
lock and place the laser in the carrying pouch.
• Make sure the pendulum lock mechanism is engaged
before transporting the laser.
1. To open the batteries cover (#5). Press the release button
(#10) at the base of the laser and pull out the battery cover.
2. Insert 2 new AA batteries of the same brand according to
the polarity diagram on the inside of the battery compartment.
3. Hook and push the battery cover in place.
AA x 2
BATTERY INSTALLATION & SAFETY
NOTE
If the Pendulum lock mechanism is not
engaged before Transportation, internal
mechanical damage can occur.
NOTE
If the laser level will not be used for a long
period, remove the batteries from the battery
compartment. This will prevent batteries from
leaking and corrosion damage.
To Next Page
Loading...