Need help?Do you have a question about the Kapro Prolaser 862 and is the answer not in the manual?
General| Self-Leveling Range | ±3° |
|---|---|
| Laser Class | Class II |
| Laser Wavelength | 635 nm |
| IP Rating | IP54 |
| Leveling Direction | Horizontal and vertical |
| Plumb Dots | Yes |
| Auto Power Off | Yes |
| Accuracy | ±0.2 mm/m |
| Working Range | Up to 100 feet with detector |
| Power Source | 4 x AA batteries |
| Laser Type | Red laser |
| Measurement Range | Up to 50m (165ft) with detector |
Details on operating the laser level in automatic self-leveling mode.
Instructions for using the laser level in manual mode for angled layouts.
Procedure to check the vertical deviation of the horizontal laser line.
Procedure to check the horizontal deviation of the laser line from side to side.
Procedure to verify the accuracy of the vertical laser line against a plumb line.
To Next Page