12
MAINTENANCE
• To maintain the accuracy of your project, check
the accuracy of your laser level according to the eld
calibration tests procedures.
• Change the batteries when the laser beams begin to dim.
• Wipe the aperture lens and the body of the laser level
with a clean soft cloth. Do not use solvents.
• Although the laser level is dust and dirt resistant to a
certain degree do not store in dusty places as a long
term exposure may damage internal moving parts.
• If the laser level is exposed to water, dry the laser
level before returning it to the carrying case to prevent
corrosion damages.
• Remove the batteries if the laser level is unused for a
long period of time to prevent corrosion damages.
To Next Page
Loading...