To Next PageTo Next PageWhat to do if the waste water tank is full on my Kärcher B 250 R?
If the waste water tank is full, the Kärcher Floor Machine will not function properly. To resolve this, empty the waste water tank.
How to refill fresh water tank on Kärcher B 250 R?
If the fresh water tank is empty, the Kärcher Floor Machine won't clean effectively. Refill the fresh water reservoir to ensure proper operation.
How to improve vacuum performance on Kärcher Floor Machine?
If your Kärcher Floor Machine has insufficient vacuum performance, try the following: * Clean the seals between the waste water tank and its cover, ensuring they're tight; replace if needed. * Clean the turbine filter at the suction support. * Clean or replace the vacuum lips on the vacuum bar. * Check the suction hose for blockages and clean if necessary. * Ensure the suction hose is tight; replace if needed. * Verify the cover on the dirt water discharge hose is closed. * Check the vacuum bar's setting.
How to resolve insufficient water quantity issue on Kärcher B 250 R Floor Machine?
If the Kärcher Floor Machine is not providing sufficient water quantity, check the fresh water level and refill the tank if necessary. Also, check hoses for blockages and clean if required. Clean the fresh water filter and ensure the fresh water ball valve is open.
How to fix battery discharged error on Kärcher Floor Machine?
If your Kärcher Floor Machine shows 'Battery discharged!', this means the battery voltage is too low. Charge the battery to resolve this issue.
How to improve the cleaning result of my Kärcher B 250 R Floor Machine?
If you're getting insufficient cleaning results with your Kärcher Floor Machine: * Set or adjust the contact pressure. * Select a more intensive cleaning program. * Check the brushes for wear and replace if needed.
What causes brush motors overloaded on Kärcher Floor Machine?
If the brush motors are overloaded on your Kärcher Floor Machine, it is because the load of the brush heads is asymmetric. Adjust the brush level to correct this.
What to do if brushes do not turn on Kärcher B 250 R?
If the brushes on your Kärcher Floor Machine do not turn, try the following: * Reduce contact pressure. * Check for and remove any foreign objects blocking the brushes.
How to fix poor cleaning performance at edges with Kärcher Floor Machine?
If you are getting poor cleaning performance at edges with your Kärcher Floor Machine: * Set the inclination of the side-brushes, adjust if required. * Replace the side brushes.
What to do for 'Brush pressure not reached' error on Kärcher Floor Machine?
If your Kärcher Floor Machine displays 'Brush pressure not reached!', check the following: * Inspect brush wear and replace if needed. * Check the brush heads for proper lowering and raising function.
General| Brand | Kärcher |
|---|---|
| Model | B 250 R |
| Category | Floor Machine |
| Language | English |
List of available languages and corresponding page numbers for manual sections.
Details about built-in safety features like safety switch and seat switch.
Explanation of danger symbols (DANGER, WARNING, CAUTION, ATTENTION) used in the manual.
Description of the machine's intended purpose and cleaning capabilities.
Guidelines for appropriate commercial use, temperature, and floor types.
Information on recycling packaging and proper disposal of old appliances and batteries.
Information on where to find current data about product ingredients.
Details on warranty terms and how to claim service from the competent sales company.
Information on using original accessories and spare parts for safe operation.
Description of the programme switch for selecting different cleaning modes.
Visual guide to symbols used on the machine for various functions and indicators.
Instructions and safety precautions to follow before operating the machine for the first time.
Important safety notes and warnings for handling and charging machine batteries.
Step-by-step guide on how to safely remove the machine from its transport pallet.
Steps to power on the machine and prepare it for operation.
Explanation of information shown on the display and how to interpret it.
Procedure for verifying the proper function of the parking brake before each operation.
Instructions for driving the machine, including safety warnings regarding gradients and surfaces.
How to adjust the operator's seat and steering wheel for optimal comfort and control.
What happens when the machine is overloaded and how to reset it.
Instructions on how to manually push the machine, including brake release.
Guidance on inspecting the turbine filter for proper installation and condition.
Safety precautions and a list of recommended detergents for various cleaning tasks.
Procedure for filling the fresh water tank, including manual and automatic fill options.
Explanation of the optional detergent metering device for precise dosing.
How to deactivate the sweeping mechanism after use.
How to adjust cleaning parameters using the Intelligent Key system.
Instructions on adjusting the vacuum bar for optimal cleaning performance.
Details on using the Grey Intelligent Key for system setup and parameter configuration.
Accessing and modifying key authorizations and display language settings.
Restoring all machine parameters to their original factory default settings.
How parameters adjusted with the Grey Intelligent Key are retained.
Using the White Intelligent Key to set up custom cleaning profiles for specific tasks.
A structured plan outlining maintenance tasks based on usage intervals (after work, weekly, monthly).
Specific maintenance checks required for the B 250 RI model.
Maintenance tasks recommended to be performed every three months.
Annual inspection requirements and recommendations for customer service.
How to reset maintenance counters after performing scheduled tasks.
Overview of general maintenance procedures and the importance of a maintenance contract.
Information on concluding maintenance contracts with Kärcher for reliable operation.
How to check the wear and fit of the drive belts for the sweeper and roller brush.
Instructions on how to safely replace blown fuses in the machine's electrical system.
How to read and acknowledge fault messages displayed as text.
How to interpret and respond to fault codes displayed numerically.
