5.965-085.0 07/13
Operation
1
A Setting the water quantity
A Adjust the water quantity using the regulating
button according to the dirt on the floor cover-
ing.
2
A Lower the cleaning head
A Press the pedal for lowering the cleaning
head downwards slightly and then move it to
the left. This unlocks the pedal. Release the
pedal slowly upwards.
The cleaning head is lowered.
3
A Lower the vacuum bar
A Pull the lever out and press it down; the vac-
uum bar is lowered.
4
F Cleaning Programs
A Eco mode
Wet clean the floor and vacuum up dirt water.
B Normal mode
Wet clean the floor and vacuum up dirt water.
C Intense mode
Wet clean the floor and allow the detergent to
react.
D Vacuum mode
Vacuum the wastewater.
E Polishing mode
Polishing the floor without the application of
liquid.
F Turn the program selection switch to the de-
sired cleaning program.
5
A Cleaning
Caution
Risk of damage to the floor covering. Do not op-
erate the appliance on the spot.
A Operate the safety switch.
The brushes rotate; water is dispensed to the
brushes depending on the setting. Depending
on the selected programme, the suction tur-
bine is running.
Ride along the surface to be cleaned with a
suitable, even speed.
To Next Page
Loading...
Need help?
General