Need help?Do you have a question about the Kärcher BD 40/12 C Bp Pack and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Battery Voltage | 25.2 V |
| Working Width | 400 mm |
| Tank Capacity (Clean Water) | 12 l |
| Tank Capacity (Dirty Water) | 12 l |
| Weight | 36 kg |
| Working width, brush | 400 mm |
| Working width, vacuum | 400 mm |
| Brush speed | 150 rpm |
| Area performance theoretical | 800 m²/h |
| Battery running time | 1 h |
| Motor rating vacuum | 200 W |
| Battery capacity | 21 Ah |
| Battery | Li-Ion |
Protective devices must remain operational and not bypassed.
General safety precautions before and after maintenance work.
How the vacuuming system operates, including starting and stopping.
Overview of the operator console and its controls.
Steps to detach and remove the suction bar assembly.
Instructions for rotating or replacing the vacuum lips.
Procedure to test and adjust the vacuum bar's performance.
How to properly adjust the vacuum bar's position.
Procedure for connecting and charging the machine's battery.
Overview of the machine's electrical components and layout.
Measuring idle voltage to assess battery charge status.
Testing battery performance under load conditions.
Detailed procedure for measuring battery voltage under load.
Procedure for testing the battery charger's functionality.
Explanation of the IUI charging process for batteries.
To Next Page